Filter
Top Products
10. REGISTERING PROCEDURE AND PRINT FORMAT
EO1-11095
10-34
10.55 REMOTE SLIP PRINTER (hardware option) OPERATION
12-19-1994 MON #3001
VEGETABLE -1,20TF
FRUIT $6,50TF
MEAT $6,00TF
TAX $0,68
TOTAL $
11
,
98
CHECK $15,00
CHANGE $3,02
ITEM 1
JONES 0222 14:35TM
CHECK No324628
TEC STORE
1343 PEACH DRIVE, TORRANCE,
CALIFORNIA
TOTAL $
11
,
98
#3001 CHECK $
15
,
00
1CL 0222 12-19-1994 14:35TM
TEC STORE
1343 PEACH DRIVE, TORRANCE,
CALIFORNIA
TOTAL $
11
,
98
#3001 CHECK $
15
,
00
1CL 0222 12-19-1994 14:35TM
Check No. Line
Endorsement Message Lines
Total Line (may not be printed)
Check Amount Line
Cashier ID, Consecutive No.,
Date, Time
-- Endorsement Print Sample --
Printed on Remote Slip Printer:
Printed on Receipt/Journal Printer:
10.55 REMOTE SLIP PRINTER (hardware option) OPERATION
The TEC Remote Slip Printer DRS-207 may be connected to the MA-1450 series ECR as an optional device.
The Remote Slip Printer will operate printing if a slip is properly inserted, regardless of the Mode Lock position
(except that no print will occur in the “SET” mode or during program verification in the “X” mode).
1. The remote slip printer will automatically activate printing when the slip has properly been set to the printer
table.
2. The following are selective status programmable relating to the remote slip printer. Ask the store manager
and mark the status selected for your store.
PROGRAM OPTIONS RELATING TO REMOTE SLIP CONTROL
• Remote Slip Print compulsory for any Previous Balance entry in “REG” or “MGR” mode:
Standard: FREE (Not compulsory)
Option: COMPULSORY (applies to any Previous Balance entry whether it is the Manual PB Entry
type or the Customer File (Check Track) Memory type.)
• Code No.(Check No.) Entry Before [CHECK NO.] key at Endorsement Print (Refer to ENDORSEMENT
PRINT operation already stated.)
Standard: FREE (Not compulsory)
Option: COMPULSORY
3. The gap of the slip inlet is usually opened, and the slip may be inserted or withdrawn freely outside a receipt/
journal print sequence.
When a slip is properly set to the remote slip printer and the ECR is operated, the gap will be closed and
printing will be performed. When the sale is finalized and the receipt is issued, the gap of the DRS-207 will be
opened to allow the slip withdrawal. (The gap keeps closed during sale item entries.)
4. The EJECT key on the DRS-207 may be used to open the closed gap in order to withdraw the slip and skip
unnecessary item print. The EJECT key will be disregarded if the slip is set and the ECR receipt/journal printer
is in a printing action.
5. Printing on the remote slip will be performed alternately with printing on the receipt/journal of the ECR.