Filter
Top Products
Error code Phenomenon Possible cause Items to confirm / Countermeasures Precautions / Remarks
CB31
2. False detection caused by the
removed actuator spring of the
movable tray paper-full sensor
(The actuator not ejected)
Reinstall SPG-ACTR-01-TRAY if it is removed.
If the actuator cannot be ejected due to its deformation or damage, replace ACTR-01-SNSR-VER01-TRAY.1. False detection of the movable
tray paper-full sensor due to its
deformed/damaged actuator (The
actuator not ejected)
- The movable tray is
lifted up after the
power is turned ON.
An error occurs when
it stops at the upper
limit position.
(Initialization does not
finish.)
- The movable tray is
lowered after the
power is turned ON.
An error occurs before
it is lowered to the
specified position.
(
Initialization finishes.
)
The movable tray may not be installed properly (the stay of the movable tray may run on the boss). Reinstall the
movable tra
y
.
3. Improper installation of the
movable tray
(An error occurs if the actuator of
the movable tray paper-full sensor
cannot be pushed due to the
improper installation of the
movable tray.)
Not ejected
Normal
Abnormal
Not ejected
Normal
Abnormal
Run on the boss
Screwed
Movable tray stay
Normal
Abnormal
㪈㪈