Filter
Top Products
User’s Manual 4-7
Operating Basics
Removing the Reserve Pen case
To remove the Reserve Pen case, follow the steps as detailed below:
1. Save your work.
2. Turn the computer’s power off - ensure that the Power indicator is off.
3. Remove all cables and peripherals that are connected to the computer.
4. Close the display panel and turn the computer upside down.
5. Slide and then lift out the Reserve Pen case.
Figure 4-6 Removing the Reserve Pen case
Inserting the Reserve Pen case
To insert the Reserve Pen case, follow the steps as detailed below:
1. Insert the Reserve Pen case into the Reserve Pen case slot on the
computer and slide it until it locks.
Figure 4-7 Inserting the Reserve Pen case
Always make sure the display panel is closed in Laptop mode before
turning the computer upside down.
Push lightly the point shown by the arrow using an object with a thin tip.
Reserve Pen case
Reserve Pen
case slot
Reserve Pen case
Reserve Pen
case slot