Filter
Top Products
4.17 Sub-speaker, USB cable, TV Tuner Splitter card 4 Replacement Procedures and
Audio Board
4.17 Sub-speaker, USB cable, TV Tuner Splitter card and Audio Board
Removing the Sub-speaker, USB cable, TV Tuner Splitter card and Audio Board
Remove the Sub-speaker, USB cable, TV Tuner Splitter card and Audio Board according to
the following procedures and Figures 4-32.
1. Remove sub-speaker from base enclosure.
2. Remove two M2.5x4 white flat round-head screws securing the USB cable.
3. Remove the USB cable from base enclosure.
4. Remove two M2x3 black flat head screws securing the TV tuner splitter card
5. Remove TV antenna (L)/(S) and TV tuner splitter card cable on the TV tuner splitter
card.
6. Remove the Audio board from base enclosure.
7. Remove audio board cable (L) from CN4000 and audio board cable (S) from CN4001
on the audio board.
USB cable
TV tuner splitter card
Sub speaker-
TV antenna L()
Audio cable L()
Audio cable S()
Audio board
TV antenna S()
TV tuner splitter
card cable
M2 5x4 white
flat screw
.
CN4000
CN4001
M2x3 black flat screw
Figure 4-32 Sub-speaker, USB cable, TV Tuner Splitter card and Audio Board
Qosmio F40/F45 Maintenance Manual 4-57