Toshiba PRO A300D Laptop User Manual


 
User’s Manual 8-12
Optional Devices
To change the display settings, press FN + F5. If you disconnect the
monitor before you turn the computer off, be sure to press FN + F5 to
switch to the internal display. Refer to Chapter 5, The Keyboard, for details
on using hot keys to change the display setting.
Television
A television can be connected to the video out port on the computer. To
connect a television, follow the steps below.
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the television to the video
out port.
Figure 8-11 Connecting a television
3. Turn the television on.
4. Turn the computer on.
HDMI
Some models are equipped with HDMI out port than can send/receive
video, audio and control signals by connecting with external display/audio
devices. 1080p, 720p, 576p and 480p signal formats are supported, but
actually available signal format depends on each HDMI devices. To
connect external devices, follow the steps as detailed below:
If you set
LCD+Analog RGB
for the computer’s display, you must set the
computer’s display resolution to the same as that of the external monitor or
other device, such as a projector.
VIDEO OUT PORT
As the port operation of all HDMI (High-Definition Multimedia Interface)
monitors has not been confirmed, some HDMI monitors may not function
properly.