Filter
Top Products
Chapter 4 Replacement Procedures
Satellite T110D / Satellite Pro T110D / PORTEGE T110D Maintenance Manual (960-Q08)
34
Installing the top cover assembly
The following describes the procedure for installing the top cover assembly.
1. Connect the Power FFC to the connector on the power board.
2. Secure the power board with the following screws.
M2.03F FLAT BIND screw x2
3. Install the top cover assembly to the base assembly.
NOTE: Be careful not to catch the cables between top cover assembly and base
assembly.
4. Connect the touch pad FFC /LAN FFC/ Power FFC to the connector on the system
board.
5. Install the Keyboard and Keyboard holder.
6. Secure the cover assembly with the following screws from the back and bottom of
computer.
M2.02F FLAT BIND screw x3
M2.03F FLAT BIND screw x2
M2.04F FLAT BIND screw x9
M2.06F FLAT BIND screw x3
M2.58F FLAT BIND screw x2