Filter
Top Products
Chapter 4 Replacement Procedures
6. With the bottom edge of the LCD unit on the display cover, lift only the top edge of
the LCD unit. After peeling off the MYLAR tape, disconnect the LCD harness from
the connector on the back of the LCD.
Figure 4-14-4 Remove the harness
7. Remove the following screws securing the LCD support (LCD unit side) and remove
the hinge from the LCD unit.
M2.02.5F FLAT BIND screw x4
Figure 4-14-5 Remove the LCD hinge
Satellite T110D / Satellite Pro T110D / PORTEGE T110D Maintenance Manual (960-Q08)
49