Filter
Top Products
4.15 Sound board/Internal microphone 4 Replacement Procedures
4.15 Sound board/Internal microphone
Removing the Sound board/Internal microphone
To remove the sound board/internal microphone, follow the steps below and refer to Figure
4-20 and Figure 4-21.
1. Remove the following screw securing the sound board.
• M2×4C S-THIN HEAD ×1
2. Disconnect the sound cable and speaker cable from the connector CN9510 and
CN6350 on the sound board and remove the sound board from the slot.
Speaker cable
Sound cable
Sound board
M2x4C S-THIN HEAD
CN6350
CN9510
Figure 4-20 Removing the sound board/internal microphone (1)
PORTÉGÉ R500 Maintenance Manual (960-634) [CONFIDENTIAL] 4-37