Filter
Top Products
User’s Manual 6-5
AC power
If you have trouble turning on the computer with the AC adaptor connected
you should check the status of the DC IN indicator.
Please refer to Chapter 5, Power and Power-Up Modes for further
information.
Battery
If you suspect a problem with the battery, you should check the status of
the DC IN indicator as well as the Battery indicator.
Problem Procedure
Computer shuts
down and DC IN
indicator blinks
orange
Leave the computer off until the DC IN indicator
stops blinking. It is recommended to leave the
computer off until the interior reaches room
temperature even though the DC IN indicator stops
blinking.
If the computer has reached room temperature and
it still does not start, or if it starts but shuts down
quickly, contact TOSHIBA Support.
Computer shuts
down and its DC IN
indicator is flashing
green
This indicates a problem with the heat dispersal
system - you should contact TOSHIBA Support.
Problem Procedure
AC adaptor doesn’t
power the computer
(DC IN indicator does
not glow green)
Check the connections to make sure that the power
cord/adaptor is firmly connected to the computer
and a working power outlet.
Check the condition of the cord and terminals. If the
cord is frayed or damaged it should be replaced,
while if the terminals are soiled, they should be
cleaned with a clean cotton cloth.
If the AC adaptor still does not power the computer,
you should contact TOSHIBA Support.
Problem Procedure
Battery doesn’t
power the computer
The battery may be discharged - connect the AC
adaptor to recharge the battery.