Toshiba 165 All in One Printer User Manual


 
1 PREPARATION
24 Description of Each Component
Description of Each Component
Front / Right side
1. Platen Cover (optional, KA-1640PC)
Place an original on the original glass and start copying with this cover closed.
2. Reversing Automatic Document Feeder (optional, MR-3019) / Automatic Document
Feeder (optional, MR-2017)
A stack of originals placed on this are scanned one sheet after another. Maximum 100
sheets (or stack height 16 mm) of originals can be placed in one go. (The maximum number
of sheets can be placed may vary depending on the media type of the originals.) 2-sided
originals can be scanned with the Reversing Automatic Document Feeder (MR-3019).
P.54 “Placing originals on Reversing Automatic Document Feeder (optional) / Automatic
Document Feeder (optional)”
P.174 “Paper jams within Reversing Automatic Document Feeder (optional) / Automatic
Document Feeder (optional)”
3. Operator’s Manual pocket (Back side)
Keep the Operator’s Manual in this.
4. Side cover
5. Bypass tray
Use this to make copies on special media types such as overhead transparencies or tracing
paper.
P.59 “Using Bypass Tray”
P.177 “Paper jams on bypass tray”
6. Paper feed cover (Upper: Paper Feed Unit / Lower: Paper Feed Pedestal)
2
1
3
4
5
6
7
8
9
10
11
12