Filter
Top Products
22
Operating a computer using the remote control
A computer can be operated using the projector’s remote control. This function
is available on any computer with the Windows 98/98SE, Windows Me, Windows
2000, or Windows XP OS, that is equipped with a USB port supporting the USB 1.1
(The mouse remote control is supported on OS 9 or OS X for the Macintosh). The
operation cannot be guaranteed for all the environments of computers.
1
Connecting a computer
Connect the supplied USB cable to the computer.
2
Operating a computer
The mouse remote control function is available when the remote control is set to [PC
Mode]. (See “Switching operation modes”.) Point the Mouse remote control at the
mouse remote control receiver, and operate the remote controlfs buttons.
• Moving the mouse pointer
Move the pointer control button in the direction that you wish the mouse
pointer to move, then press.
•
To left click
Press the L-CLICK button.
•
To right click
Press the R-CLICK button.
•
To drag and drop
Move the pointer control button in a (L-)clicked state, then when the pointer is
over the desired location, release the button.
• Using the computer’s up and down arrow key functions
Press the
and
buttons to switch PowerPoint
®
slides.
®
slides.
®
Remote Control Front
Remote Control
Rear
L-CLICK
R
-CLICK
Pointer control
User Controls (Continued)