Filter
Top Products
32
The default setting menu
This menu shows placement status and other settings.
Item
Description
Projection
mode
Sets projection mode in accordance with Placement Style.
Standard :
The factory default setting.
Rear-Desktop:
When you select this function, the projector
reverses the image so you can project behind a translucent
screen.
No signal
power off
Set the timer to wait for the power to be turned off after signal input
stops.
Press
. Switch with
and
.
Off
(not turned off)/
1 min.
/
5 min.
/
10 min.
/
30 min.
/
60 min.
Auto input
search
Set whether the input with signals is only selected or not.
On
Off
Lamp power
[Note 1]
Sets the lamp power.
Low
Standard
Fan mode
[Note 2]
Sets the cooling fan speed.
Standard
High
Reset all
Press
.
Resets all adjustments and settings to their factory settings.
Yes
No
Notes
1: When
Lamp power
is set to
Low
, the screen becomes a little darker, but the cooling fan noise gets
quieter.
2: Setting
[Fan mode]
to
[High]
increases the cooling fan speed. Set this option to use the projector,
for example, at high altitude (over 1,500 meters above sea level).
Using the menu (Continued)