Filter
Top Products
24
Turning the power on and off
Connecting the power cord
Insert the power cord connector into the
AC IN socket of the projector.
Insert the power cord plug into a wall or
other power outlet.
Turning the power on
Press the ON/STANDBY
button.
The power turns on
, and green
indicators light: POWER.
After a moment, the start-up screen
appears.
CAUTION
• Do not look into the lens while the lamp is on. The strong light from the lamp may cause
damage to your eyes or sight.
• Do not block the air intake or exhaust. Doing so could cause a fi re due to internal overheating.
• Do not place your hands, face, or other objects near the air exhaust. Doing so could cause
burns, deform/break the object.
Notes
•
The start-up screen will disappear after a moment. You can dismiss the start-up screen
before this by performing any operation. You can also confi gure the start-up screen not to
appear via the
Display setting
menu.
Be sure to remove the lens cover when the power is turned
on. If it is left on, it could become deformed due to heat.
Power cord
Power cord
connector
connector
(Supplied)
(Supplied)
Installation (Continued)
Removing the lens cover
Control panel
Remote
Control
Start-up screen