Filter
Top Products
User’s Manual C-3
TECRA A11/S11, Satellite Pro S500
2.4GHz Band Channels Sets
(Wireless IEEE 802.11 Revision b, g and n)
*1 Factory-set default channels
*2 The band width and the channel which can be used depends on the
installed wireless LAN module. And the approved channels on using are
different at each country or region. Check if these channels can be used
in your country/region. The channel configuration is managed as
follows:
■ For wireless clients that operate in a Wireless LAN Infrastructure,
the Wireless LAN module will automatically start operation at the
channel identified by the Wireless LAN Access Point. When
roaming between different access points the station can dynamically
switch to another channel if required.
■ For Wireless LAN modules installed in wireless clients that
operating in a peer-to-peer mode, the module will use the default
channel 10.
■ In a Wireless LAN Access Point, the Wireless LAN module will use
the factory-set default channel (printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.
Frequency Range
Channel ID
2400-2483.5 MHz
1 2412
2 2417
3 2422
4 2427
5 2432
6 2437
7 2442
8 2447
9 2452
10 2457*
1
11 2462
12 2467*
2
13 2472*
2