Filter
Top Products
User’s Manual C-5
TECRA A11/S11, Satellite Pro S500
*2 The channel which can be used depends on the installed wireless LAN
module. And the approved channels on using are different at each
country or region. Check if these channels can be used in your
country/region.
The channel configuration is managed as follows:
■ For wireless clients that operate in a Wireless LAN Infrastructure,
the Wireless LAN module will automatically start operation at the
channel identified by the Wireless LAN Access Point. When
roaming between different access points the station can dynamically
switch to another channel if required.
■ For Wireless LAN modules installed in wireless clients that
operating in a peer-to-peer mode, the module will use the default
channel 10.
■ In a Wireless LAN Access Point, the Wireless LAN module will use
the factory-set default channel (printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.