Filter
Top Products
4 Replacement Procedures 4.2 Wireless LAN Card
4.2 Wireless LAN Card
Removing the Wireless LAN Card
Remove the wireless LAN card according to the following procedures and Figures 4-10 and
4-11.
CAUTION: Do not touch the connectors on the wireless LAN card and in the computer
with bare hands. Wireless LAN cards can fail if they are contaminated with sweat, natural
oils, etc. from your hands.
1. Turn the computer upside down.
2. Release the wireless LAN cover securing screw.
3. Remove the wireless LAN cover.
4. Disconnect the two antenna cables with the tweezers.
5. Spread out both the left and right stoppers for fixing the wireless LAN card until the
card can be raised.
6. Pull the wireless LAN card up and out at an angle.
Figure 4-10 Removing the wireless LAN card cover
4-22 Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual