Filter
Top Products
4 Replacement Procedures 4.3 HDD
Installing the HDD
Install the HDD according to the following procedures and Figures 4-12, 4-13 and 4-14.
CAUTION: To avoid damage, always hold the HDD only by its sides.
1. Attach the HDD chassis and connector to the HDD pack.
2. Secure the HDD and its chassis with the two M3x4 black flat-head screws with M3x4
white head screws.
CAUTION: When installing the HDD pack into the computer, do not press the center of
the HDD pack to prevent the HDD bracket from being distorted. Always hold the HDD
pack by its sides.
3. Install the HDD pack into the correct position in the computer. Connect the HDD
pack to the computer, holding the HDD pack by its sides.
4. Insert the HDD pack.
5. Secure the HDD cover with two M2.5x5 black flat-head screws.
4-26 Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual