Filter
Top Products
Easy Smart Configuration Utility
User Guide
The setting fi
gure will shown as below:
Figure 2-9 Switch Setting
You can configure the switch’s Device Description, DHCP Setting, IP Address, Subnet Mask and
Default Gateway on this page. The login User Name and Password are required to complete the
configuration. By default, they are both admin. Clicking Apply can only make the new
configurations effective before the switch is rebooted. If you want to keep the configurations
effective even the switch is rebooted, please select the checkbox behind Save Config.
2.5 Refresh
Click Refresh in Figure 2-7 to restart the switch discovering process.
2.6 Utility Features Overview
You can select a switch and click or double click its corresponding entry to log on to the
switch for further configuration.
9