Filter
Top Products
6
Chapter 1
Get to Know About Your Modem Router
LED Explanation
Name Status
Indication
WPS
On A WPS synchronization is established.
Flashing
A wireless device is trying to connect to the network via WPS.
This process may take up to 3 minutes.
Off
A WPS synchronization has been established for more than 5
minutes or a WPS synchronization failed.
USB
On The USB device is identified and ready to use.
Flashing The USB device is being identified.
Off No USB device is plugged into the USB port.
LAN
On At least one LAN port is connected.
Off No LAN port is connected.
Wireless
On The wireless 2.4GHz or 5GHz band is enabled.
Off The wireless function is disabled.
Internet
On Internet connection is available.
Off
No Internet connection or the modem router is operating in
Bridge mode.
ADSL
On ADSL line is synchronized and ready to use.
Flashing The ADSL negotiation is in progress.
Off
ADSL synchronization failed. Please refer to Note 1 for
troubleshooting.
Power
On Power is on.
Off Power is off.
Note:
1. If the ADSL LED is off, please check your Internet connection first. Refer to Connect Your Modem Router for more
information about how to make Internet connection correctly. If you have already made a right connection,
please contact your ISP to make sure your Internet service is available now.
2. If the Internet LED is off, please check your ADSL LED first. If your ADSL LED is also off, please refer to Note 1. If your
ADSL LED is ON, please check your Internet configuration. You may need to check this part of information with
your ISP and make sure everything have been input correctly.