Filter
Top Products
Archer CR700
AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide
Enable MAC Filtering- The switch for the MAC Filtering. If you turn on this button, the field
will become green and you can filter wireless users by MAC Address.
Filtering Rules:
Select the Filtering Rule - You can select either of Block List or Allow List as the MAC
filtering rule.
Click the Save button to save the settings.
Devices in List:
Add - You can add a new device for the MAC Filtering rule by clicking Add button.
M AC Addre ss - This field displays the MAC address of the wireless station that cannot
access this router/can access this router.
Modify - Click the icon to delete this entry.
To add a MAC Address Filtering entry:
1. Click
Add button, then you will see a setting page.
2. Enter the appropriate MAC Address into the M AC Addre ss field. The format of the MAC
Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example:
00-1D-0F-11-22-33.
Figure 5-21
3. Click the OK button to save this entry. If you do not want to save this entry, click the Cancel
button.
For example: If you desire that the wireless station A with MAC address 00-1D-0F-11-22-33 and
the wireless station B with MAC address 00-0A-EB-00-07-5F are able to access the modem router,
but all the other wireless stations cannot access the modem router, you can configure the M AC
Filtering settings by following these steps:
1. Switch on the Enable MAC Filtering button to enable this function.
2. Select the White List for Filtering Rules.
3. Delete all or disable all entries if there are any entries already.
4. Click the
Add
button.
45