Filter
Top Products
Archer CR700
AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide
Figure 5-27
Figure 5-28
Step 6: Press and hold the WPS button of the client device directly.
Step 7: The WPS LED flashes for two minutes during the Wi-Fi Protected Setup process.
Step 8: When the WPS LED is on, the client device has successfully connected to the modem
router.
Refer back to your client device or its documentation for further instructions.
IV. Enter the client device’s PIN on the modem router
Use this method if your client device has a Wi-Fi Protected Setup PIN number.
Step 3: Enter the PIN number from the client device in the field, as shown in the following figure.
Then click Connect button.
53