Filter
Top Products
Archer CR700
AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide
Figure 5-25
Wireless Radio – Check the box to enable the Wireless Radio.
Power – Here you can specify the transmit power of the modem router. You can select 25%,
50%, 75% and 100% which you would like. 100% is the default setting and is recommended.
Mode – Select the desired mode.
11a/n/ac mixed: Select if you are using a mix of 802.11a, 11n and 11ac wireless clients.
11ac/n mixed: Select if you are using a mix of 802.11ac and 11n wireless clients.
11ac only: Select if you are using 802.11a wireless clients.
Select the desired wireless mode. It is strongly recommended that you set the Mode to
11a/n/ac mixed, and all of 802.11a, 802.11n, and 802.11ac wireless stations can connect to
the modem router.
BandWidth - Select the channel width from the drop-down list. The default setting is Auto,
which can adjust the channel width for your clients automatically.
Channel - Select the channel you want to use from the drop-down list of Channel. This field
determines which operating frequency will be used. It is not necessary to change the wireless
channel unless you notice interference problems with another nearby access point.
Click the Save button to save the settings.
5.5.2 Primary Network
Choose menu “Advanced
→
Wireless 5G
→
Primary Network”, You can configure the
wireless 5G primary network.
49