Filter
Top Products
Archer C20i AC750 Wireless Dual Band Router
- 96 -
There are two submenus under the Advanced Routing menu as shown in Figure 4-86: St
atic
Route List and System Routing Table. Click any of them, and you will be able to configure the
corresponding function.
4.16.1 Static Route List
Choose menu “Advanced Routing → Static Route List”, and then you can configure the static
route in the next screen (shown in Figure 4-87). A static route is a pre-d
etermined path that
network information must travel to reach a specific host or network.
Figure 4-87 Static Route
To add static route entries:
1. Click Add New shown in Figure 4-87, you will see the following screen.
Figure 4-88 Add or Modify a Static Route Entry
2. Enter the following data:
Destination IP Address - The Destination IP Address is the address of the network or
host that you want to assign to a static route.
Subnet Mask - The Subnet Mask determines which portion of an IP Address is the
network portion, and which portion is the host portion.
Gateway - This is the IP Address of the gateway device that allows for contact between
the router and the network or host.
3. Select Enabled or Disabled for this entry on the Status drop-down list.