Filter
Top Products
TL-WPA4220/TL-WPA281 300Mbps AV500/AV200 WiFi Powerline Extender
38
Step 2. Within two minutes, press and hold the Pair button on Powerline device A/B for one second.
Step 3. Wait for about 60 seconds while your powerline devices are connecting. The Power LED on
powerline device A/B and C will stop flashing and become solid light when the connection is
made.
) Note:
The sequence of Step 1 and Step 2 can be exchanged.
Leave an existing Powerline Network:
As the figure above shows, powerline device A, B and C have formed a powerline network. The user
wants to remove one device (powerline adapter C) from this network.
Step 1. Press and hold the Pair button on powerline device C for at least 10 seconds. Powerline
device C will reset and restart.
Step 2. Wait for the reset to complete.
5.3 Reset
To reset the powerline device：
Press and hold the Reset button more than 5 seconds, and then release the button. You will see all
LEDs begin to flash. At this moment, the default settings have been restored.
Be careful, don’t power off when the device is in reset process.