Filter
Top Products
Figure 2-2 Front Panel of TL-SG1024DE
The following parts are located on the front panel of the switch:
Reset: With the switch powered on, press this button for five seconds or above to reset the
software setting back to factory default setting.
1000Mbps Ports: Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or
1000Mbps. Each has a corresponding 1000Mbps LED and link/Act LED.
LEDs
Name Status Indication
On Power is on.
Flashing Power supply is abnormal.
Power
Off Power is off or power supply is abnormal.
On A 1000Mbps device is connected to the corresponding port.
1000Mbps
Off
A 10/100Mbps device or no device is connected to the
corresponding port.
On A device is connected to the corresponding port but no activity.
Flashing Data is being transmitted or received.
Link/Act
Off No device is connected to the corresponding port.
2.3.2 Rear Panel
The rear panel of TL-SG1016DE/TL-SG1024DE features a power socket and a Grounding
Terminal (marked with
).
Figure 2-3 Rear Panel of TL-SG1016DE
Grounding Terminal: TL-SG1016DE/TL-SG1024DE already comes with Lightning Protection
Mechanism. You can also ground the switch through the PE (Protecting Earth) cable of AC cord
or with Ground Cable.
AC Power Socket: Connect the female connector of the power cord here, and the male
connector to the AC power outlet. Please make sure the voltage of the power supply meets the
requirement of the input voltage (100-240V~ 50/60Hz 0.6A).
Return to CONTENTS
5