Filter
Top Products
For the newly joined member ports in a trunk group, their default setting of Port setting
(Speed and Duplex, Flow Control), QoS will be configured the same as that of the first
member port in the trunk group.
The trunk member ports cannot be set as mirroring port.
Before setting the trunk, its member ports should be divided to the same VLAN, and have the
same PVID and drop the untagged packet rule. Change of the trunk setting will not affect the
VLAN setting.
If the port trunk is needed, you are suggested to configure the port trunk function here before
configuring the other functions for the member ports.
On this page, you can configure and view the information of the trunk group of the switch.
Choose the menu System→Switching→Port Trunk to load the following page.
Figure 4-6 Trunk Group Setting
Here you can configure and view the port parameters.
Trunk Group Setting
Group ID: Select an identified number for the trunk group from the
drop-down list.
13