Filter
Top Products
Figure 5-5 802.1Q VLAN Configuration
To ensure the normal communication of the factory switch, the default VLAN of all ports is set to be
VLAN1. VLAN 1 cannot be modified or deleted.
The following entries are displayed on this screen:
802.1Q VLAN Configuration
802.1Q VLAN
Configuration：
Enable or disable 802.1Q VLAN mode.
VLAN ID：
Enter the ID number of VLAN. It ranges from 2 to 4094.
VLAN Name：
Give a name to the VLAN for identification.
Port：
Displays the port number.
Untagged：
Click the check box to configure the egress rule of the traffic on
this port as untagged. The switch drops the tag header before
sending the packet.
26