Filter
Top Products
37
Example
Enable the GVRP function for ports 2-6:
TP-LINK(config)# interface range ethernet 2-6
TP-LINK(config-if)# gvrp
gvrp registration
Description
The gvrp registration command is used to configure the GVRP registration
type on the desired port. To restore to the default value, please use no gvrp
registration command.
Syntax
gvrp registration { normal | fixed | forbidden }
no gvrp registration
Parameter
normal | fixed | forbidden —— Registration mode. By default, the registration
mode is normal.
Command Mode
Interface Configuration Mode（interface ethernet / interface range ethernet）
Example
Configure the GVRP registration mode on the port 2-6 to fixed:
TP-LINK(config)# interface range ethernet 2-6
TP-LINK(config-if)# gvrp registration fixed
gvrp timer
Description
The gvrp timer command is used to set a GVRP timer for the desired port. To
restore to the default setting of a GARP timer, please use no gvrp timer
command.
Syntax
gvrp timer { leaveall | join | leave } {value}
no gvrp timer {leaveall | join | leave}