Filter
Top Products
TL-SL2109 8+1G Gigabit Ethernet Smart Switch User Guide
Fig 4.7 Connected at fault
4. After connecting successfully, the GSSC will read the configuration from the switch,
and display the interface as Fig 4.8.
Caution: At this time the Off Line button is light. On the right of the button, there
are eight buttons, Port Setting, TRUNK Setting, Port Close Setting, VLAN Setting,
Priority Setting, Static MAC Address Setting, in turns.
Fig 4.8 Connected successfully
5. Operate the configuration. When the PC connects to the switch successfully. You
can configure the switch in terms of your requirement. You must click the write to
switch button lastly, the switch will reset automatically after success in
- 13 -