Filter
Top Products
Appendix C: Device Commands & Definitions Transition Networks
Command Description
snmpget SNMP GET on the OID is performed try "snmpget
help" for more information.
Usage: snmpget [oid=1.2.3.4 | variable=<leaf var | tableEntry.x.y>]
• If the ‘oid’ option is used, the indices should be
present for table variables and '0' for leaf variables.
• If the 'variable' option is used, the leaf variables can
be named as is, the table variables have the
following format <tableentry>.index1.index2
Ex: snmpget variable=sysUpTime
snmpget variable=ifEntry.<col>.<ifNumber>
snmpgetn SNMP get-next on the OID is performed if there is no
OID specified. It uses OID from the last SNMP query,
try "snmpgetn help" for more information.
Usage: snmpgetn [oid=1.2.3.4 | variable=<leaf var|tableEntry.x.y>]
• If the 'oid' option is used, the indices should be
present for table variables and '0' for leaf variables.
• If the 'variable' option is used, the leaf variables can
be named as is, the table variables have the
following format <tableentry>.index1.index2.
Ex: snmpgetn variable=sysContact
snmpgetn variable=ifEntry ifEntry.<col>.<ifNumber>
snmpset SNMP SET on the OID is performed with the value, try
"snmpset help" for more information.
Usage: snmpset oid=<x.y.z> type=<STR | IP | INT>
value=<value>
• Strings must be enclosed in quotes (“”). If the ‘oid’
option is used, the indices should be present for
table variables and ‘0’ for leaf variables.
• If the 'variable' option is used, the leaf variables can
be named as is, the table variables have the
following format <tableentry>.index1.index2
Ex: snmpset variable=sysContact type=STR
value="techsupport@transition.com"
snmpset variable=ifEntry.2.<ifNumber>
type=STR value="Interface 1."
Continued on next page
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 127