Filter
Top Products
Transition Networks Appendix D: IP-Based and Chassis Management Parameters
Table 26: System Configuration Parameters (continued)
Parameter IP based Chassis Description
RADIUS Retry
Retries after a network failure.
9
RADIUS Secret
9
The shared secret between this Device
and the RADIUS server.
9
The IP address of the RADIUS server is
used to get user information during
authentication.
RADIUS Server
Address
RADIUS timeout
9
Timeout for each attempt to contact the
server.
Serial Access
Enable/disable USB port access.
9 9
Serial Number
9 9
Serial number of the chassis that the
Device is installed.
SNMP Access
Enable/disable SNMP management.
9 9
SNMP Trap Mgr
SNMP trap manager IP address.
9 9
Subnet Mask
9 9
Determines where the network number in
an IP address ends and the node number
in an IP address begins.
TFTP Filename
9 9
The filename used to upgrade, using
TFTP (local Device only).
9 9
TFTP server IP address to use for
firmware upgrades (local Device only).
TFTP Server
Address
TFTP upgrade
9 9
Initiates TFTP firmware upgrades (local
Device only).
9 9
Enable/disable TLPT. TLPT causes the
loss of link on one side of a Device to be
passed through to the other side so that
the upstream Device can see fault
conditions that would otherwise be
hidden by Devices.
Transparent Link
Pass-Through
Note: TLPT requires Auto-Negotiation
to be enabled on the twisted pair
interface.
Continued on next page
130
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600