Filter
Top Products
Transition Networks SISTG10xx-111-LR(T) Industrial Media Converter
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
8
DIN rail mounting
DIN rail clip
The Media Converter includes an aluminum DIN Rail Clip attached to the rear panel. Verify
the clip is attached and oriented as pictured in Figure 4 below.
Figure 4: Mounted DIN Rail Clip
DIN rail mounting
considerations
Consider the following before mounting the DIN rail to a surface and attaching the Media
Converter:
• The surface must support at least 450g (1.0 lbs) for the Media Converter.
• Do not place heavy objects on the Media Converter.
CAUTION
Mount the Media Converter with proper spacing around it for ventilation (heat
dissipation). Failure to observe this caution could result in damage to the Media
Converter.
CAUTION
Please exercise caution when using power tools. Do not install this unit in damp or wet
locations, or in close proximity to very hot surfaces. Failure to observe this caution could
result in damage to the Media Converter and cables.
Continued on next page
DIN Rail Clip
(installed)
Screws (3)
Metal spring