Filter
Top Products
SISTG10xx-111-LR(T) Industrial Media Converter Transition Networks
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
21
Light Emitting Diodes (LEDs)
LEDs
The Media Converter has LED indicators located on its front panel. The LEDs present at-a-
glance network status, and provide real-time connectivity information. Figure 19 shows the
LEDs and a chart that explains the function of each.
LED Description
P1 Green = input power present on PWR1
input
P2 Green = input power present on PWR2
input
FAULT
Red = Loss of either power input
(DIP switch #1 must be enabled [ON])
LNK/ACT
(Fiber port)
Green = fiber link
Green (blinking) = fiber port is receiving
link pulses or data from a
1000Base-X compliant port
1000M Yellow = 1000Mbps
Off = 10Mbps or 100Mbps or no link
LNK/ACT
(UTP port)
Green = UTP link
Green (blinking) = UTP port is receiving
link pulses or data from a
10/100/1000Base-T compliant port
Figure 19: LEDs and Description Chart