Filter
Top Products
Transition Networks SISTP10xx-141-LR(T) Industrial PoE Switch
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
8
DIN rail mounting
DIN rail clip
The Industrial PoE Switch includes an aluminum DIN Rail Clip attached to the rear panel.
Verify the clip is attached and oriented as pictured in Figure 4 below.
Figure 4: Mounted DIN Rail Clip
DIN rail mounting
considerations
Consider the following before mounting the DIN rail to a surface and attaching the Industrial
PoE Switch:
• The surface must support at least 450g (1.0 lbs) for the Industrial PoE Switch.
• Do not place heavy objects on the Industrial PoE Switch.
CAUTION
Mount the Industrial PoE Switch with proper spacing around it for ventilation (heat
dissipation). Failure to observe this caution could result in damage to the Industrial PoE
Switch.
CAUTION
Please exercise caution when using power tools. Do not install this unit in damp or wet
locations, or in close proximity to very hot surfaces. Failure to observe this caution could
result in damage to the Industrial PoE Switch and cables.
Continued on next page
DIN Rail Clip
(installed)
Screws (3)
Metal spring