Filter
Top Products
Transition Networks SISTP10xx-141-LR(T) Industrial PoE Switch
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
10
Wall mounting
Wall mount
bracket
The Industrial PoE Switch includes wall mount brackets and screws in the contents of the
shipping package. The wall mount brackets can be attached to the top and bottom panels of
the Industrial PoE Switch to enable mounting to a vertical surface such as the wall of an
enclosure. Locate the brackets (2) and screws (8) and follow the steps below to install the
brackets on the Industrial PoE Switch.
Wall mount
bracket install
To install the wall mount brackets to the Industrial PoE Switch, see Figure 6 and do the
following:
Step Action
1. Remove existing screws (3) and DIN-Rail bracket from rear of Industrial PoE
Switch.
2. Locate wall mount brackets (2) and screws (8) from Industrial PoE Switch
packaging.
3. Place brackets in correct orientation as shown and insert and tighten screws to
secure bracket to the top and bottom of Industrial PoE Switch.
4. Mount assembled device to a wall per locally accepted practices for anchoring
and securing. (Wall mount screws not included.)
Figure 6: Installing wall mount brackets to Industrial PoE Switch
Remove screws and
DIN rail bracket
Locate wall mount
brackets and screws
1
2
3
Screw brackets onto top and
bottom of Industrial Switch