Filter
Top Products
SISTP10xx-141-LR(T) Industrial PoE Switch Transition Networks
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
v
Cautions and warnings
Cautions and
warnings
Make sure that you read and understand all content identified by these two symbols:
Cautions and warnings appear here and throughout this manual where appropriate. Failure to
read and understand the information identified by the “caution” and “warning” symbols could
result in poor equipment performance, damage to equipment, or injury to persons.
Cautions
Cautions indicate the possibility of damage to equipment.
CAUTION
Make sure that the Industrial PoE Switch is mounted with proper space around it for
ventilation (heat dissipation). Failure to observe this caution could result in damage to the
Industrial PoE Switch.
CAUTION
Please exercise caution when using power tools. Do not install this unit in damp or wet
locations, or in close proximity to very hot surfaces. Failure to observe this caution could
result in damage to the Industrial PoE Switch and cables.
CAUTION
Only qualified persons should install the Industrial PoE Switch. Failure to observe this
caution could result in poor performance or damage to the Industrial PoE Switch.
CAUTION
Install the Industrial PoE Switch in an environment where the temperature range will not
exceed the stated environmental specifications for the particular model being installed.
Failure to observe this caution could result in permanent damage to the Industrial PoE
Switch.
CAUTION
DO NOT install the Industrial PoE Switch in areas where strong electromagnetic fields
(EMF) exist. Failure to observe this caution could result in poor Industrial PoE Switch
performance and data corruption.
CAUTION
The Industrial PoE Switch must be mounted to a well-grounded surface. Failure to
observe this caution could result in EMI problems.
CAUTION
When connecting DC power wires to the terminal-block plug, pay close attention to the
polarity markings shown near the terminal block of the Industrial PoE Switch. Failure to
observe this caution could result in damage to the equipment.
CAUTION
This is a Class A product. In a residential environment, this product could cause radio
interference in which case the user may be required to take adequate corrective
measures.
Continued on next page