StackMasterTR
3-12
Resetting the StackMaster™TR 16-Port
NOTE: The StackMaster™TR 16-Port can be reset in any of the following
ways:.
• Disconnect power cord to StackMaster™TR 16-Port unit with installed
SNMP management board, then reconnect the power cord.
• Press the reset button on the StackMaster™TR 16-Port unit with
installed SNMP management board
• At the attached terminal or terminal emulation, type and enter:
ANY MENU> restart
ANY MENU> quit
At power on or reset, the Status LEDs cycle through diagnostic test patterns
as internal StackMaster™TR 16-Port software tests: Flash, serial port,
dynamic RAM, static RAM, dual port memory, and each of the Ethernet
ports.
After the diagnostic test patterns, for twenty seconds, the Status LEDs
display a pattern in which four LEDs remain illuminated while four LEDs
flash continuously. This pattern indicates that the StackMaster™TR 16-Port
software is waiting for an optional user interrupt.