TrekStor Xiron10.1 Tablet User Manual


 
EN
17
19) Activating the Standby Mode
If you do not want to use the SurfTab for a while, briefly press the power
button to put the tablet in the standby mode and save energy. To exit
the standby mode, briefly press again the power button.
Once you have reactivated the screen, the SurfTab first displays the screen
lock. Tap the lock icon and pull the icon to the right edge of the circle onto
the open lock. Your SurfTab shows the home screen.
i
The SurfTab is locked automatically when it is not used for a certain
time. A change of the interval, from when the SurfTab is supposed to go
automatically into the standby mode, can be individually adjusted under
"SettingS" + "diSpLay" + "SLeep".
20) Reset
If your SurfTab no longer responds, you can restart it by pressing the reset
button on the back of the device. To do this, you will need a small pin or
a paper clip.
i
Please do not use needles or similar sharp objects, because you can damage
your SurfTab.
21) Turning off SurfTab
a) Press the on the on/off switch for about 2 - 4 seconds.
b) The following message appears: "
DO yOU wAnt tO ShUt DOwn?". Press "OK",
to turn the SurfTab off.