Filter
Top Products
12
Step 4: Save and Restart
The Setup wizard is now completed. The new settings will be take effect after the
Access Point has restarted. Please click “Restart” to save the new configuration
and reboot the Access Point. Click “Exit” to quit without making any changes.
Users also can go back to modify the setting by clicking “Back”.
Status
This page shows the following information.
Firmware Version: Shows the current firmware version and released date code.
LAN: Shows the Mac address, IP address (default: 192.168.10.100), Subnet Mask
and Gateway Address. The current LAN traffic calculated in terms of number of
packets sent and received by the AP through a wired connection is also displayed.