15
Channel Width: Select the Channel Width:
z 20MHz - Select if you are not using any 802.11n wireless clients.
z Auto 20/40 - This is the default setting. Select if you are using both
802.11n and non-802.11n wireless devices.
Authentication Type: The authentication type default is set to open system.
There are four options: Disabled, WEP, WPA, and WPA2.
WEP Encryption
Key Type: Open System and Shared Key requires the user to set a WEP key to
exchange data with other wireless clients that have the same WEP key.
WEP Key: Select the level of encryption from the drop-down list.
Mode: Select the key type: ASCII or HEX
Key 1 ~ Key 4: Enables users to create up to 4 different WEP keys. Manually
enter a set of values for each key. Select a key to use by clicking the radio button
next to the key.