42
System Administration – E-mail
The E-mail menu contains the commands for E-mail account,
time schedule and manual operation settings.
Click “E-mail” in the system administration menu bar, and the
setting screen will appear as below:
Enter the relevant information, such as the SMPT Server Address,
Sender e-mail Address, Receiver e-mail Address, User Name and
Password.
Then active sending e-mail by selecting “Enable e-mail Image”
in enter “Time schedule” or “Manual Operation”.
Click “Home” to
return to Home
Screen
43
• SMTP (Simple Mail Transfer Protocol) is a protocol for
sending e-mail messages between servers you need to
input the mail server address in this field.
• Sender e-mail is the e-mail address of the user who will
send the e-mail.
• Receiver e-mail is the e-mail address of the user who
will receive the e-mail.
• User Name: Enter the user name in this field.
• Password: Enter the user password in this field to login
receiver’s mail server
Time Schedule:
To set schedule to send e-mail.
“Interval”: Define time interval between two images sent.
Manual Operation:
When you chick the E-mail image button in view image screen, it
will start to e-mail image.
“Interval”: To define time interval between two images sent.
Save/Cancel:
After making sure all settings in the System are correct, click the
“Save” button to store the settings for the Wireless Internet
Camera. You can alternatively click the “Cancel” button to
restore all settings to the values last saved to or retrieved from the
Wireless Internet Camera.