Tripp Lite 2-9USTAND Power Supply User Manual


  Open as PDF
of 15
 
5
Important Safety Instructions
Connection and Start-Up
Plug your UPS’s line cord into an
electrical outlet.
Your UPS mustbe connected toa dedicated
circuitofsufficientamperage.Note,however,
that the select models may be fitted with
differentplugtypes.Refertothe“OPRating/
PlugRating”chartprintedonthetopofyour
UPS.
OnceyourUPSispluggedin,thefanandall
IndicatorLightswillturnON.The“LINE”and
“LOADACTIVEMETER”LEDswillilluminate
andtheUPSwillemitabeeptoindicatenormal
operation.However,powerisnotsupplied to
yourUPS’sACoutlets untiltheUPS isturned
on.
Plug your equipment into your UPS.
Your UPS is designed to support computer
equipmentonly.YouwilloverloadyourUPSif
you connect household appliances or laser
printerstotheUPS'soutlets.
Turn your UPS ON:
• Pressthe“ON/TEST”Button
• Holditforseveralsecondsuntilyou
hearabeep
• Releaseit
Your UPS will begin providing AC power to its outlets.
The “ON LINE” LED will illuminate.
Your UPS will functionproperly without these
connections.
Phone Line or Phone/Network
Line Surge Suppression
Your UPS has jacks which protect against
surgesonaphoneline.Selectmodelsfeature
jacks which also protectagainst surges on a
networkline.*Usingappropriatetelephoneor
network cordsconnect your walljack to the
UPS jack marked “IN.” Connect your
equipment to the UPS jack marked “OUT.”
Makesurethe equipmentyou connectto the
UPS'sjacksisalsoprotectedagainstsurgeson
theACline.
*NotcompatiblewithPoE(PowerOverEthernet)applications.
Your model may differ.
1
1
2
3
2
3
Your model may differ.
Installation
(continued)
Optional Connections
1
1
Your model may differ.
 previous next