Tripp Lite 2-9USTAND Power Supply User Manual


 
9
Rear Panel
“REPLACE BATT” LED:Thisredlightwillilluminateconstantly
and the UPS alarm will beep every 2 seconds if your UPS’s
microprocessor detects a battery fault or if your UPS fails the
automaticself-test(afteryouturnyourUPSON)andtheUPSbattery
islessthanfullycharged.LettheUPSsystemchargeforatleast12
hoursandperformaselftestusingthe“ON/TESTButton”asdescribed
onpage 7.If thelight continuesto stayon, contactTrippLitefor
service.
Accessory Slot:Removethesmallcoverpanelfromthisslottouse
optional accessories to remotely monitor and control your UPS.
Contact Tripp Lite Customer Supportat (773) 869-1234for more
information,includingalistofavailableSNMP,networkmanagement
andconnectivityproducts.
External Battery Pack Connector (configuration varies by model):
Use to connect optional Tripp Lite Battery Packs for additional
runtime.ContactTrippLiteCustomerSupportat(773)869-1234for
theappropriateTrippLitebatterypacktoconnect.Refertoinstructions
availablewiththeBatteryPackforcompleteconnectioninformation
andsafetywarnings.
Fan:ThefancoolstheUPS’sinternalcomponents.Itisalwayson
whenlinepowerispresent.
Input Circuit Breaker Switch:Thisresettablebreakerpreventshigh
inputcurrent fromdamaging theUPS orthe attachedload. Ifthis
breakertrips,makesureyourUPSisconnectedtoACpowerofthe
proper voltage before resetting the circuit breaker by pushing the
breakerswitchin.
Ground Screw: Use this to connect any equipment that requires a
chassisground.
Output Circuit Breakers Switches (Select Models Only):These
resettablecircuitbreakersprotectyourUPSfromoutputoverload.If
oneorbothbreakerstrip,removesomeoftheloadonthecircuit(s)
andallowtheUPStocoolbeforepressingthebreakerswitch(es)in
to reset.
Front Panel Indicator Lights continued
Basic Operation
(continued)