Tripp Lite B007-008 Switch User Manual


 
11
OSD Overview
• F4 QV:
Broaden or narrow the number of ports that get scanned by using the QV (Quick View Scan)
function. [F4] is a toggle that selects or deselects the currently highlighted port for the Quick View
Scan function (see F2 on page 10). To select/deselect a port for QV:
1. Use the Up and Down Arrow Keys to move the highlight bar to the port.
2. Press [F4].
An arrowhead in the QV column indicates when a port has been selected for Quick View Scanning.
F5 Name:
Every port can be named. The Name function allows you to name (or rename) the currently
highlighted CPU Port. To edit a Port Name:
1. Use the Navigation Keys to move the highlight bar to the port you want (you can use the F3 List
function to broaden or narrow the port selection list).
2. Press [F5].
3. Key in the new Port Name.
The maximum number of characters allowed is 15. Legal characters include:
All alpha characters: a - z; A - Z
All numeric characters: 0 - 9
+, -, /, :, ., and Space
Case does not matter; OSD displays the Port Name in all capitals no matter how they were keyed in.
4. Press [Enter] to have the change take effect or press [Esc] to abort.
F6 Set:
[F6] allows you to configure the OSD settings. To change a setting, use the Up and Down Arrow
Keys to move the highlight bar to it, then press [Enter]. On the submenu that appears next, move the
highlight bar to your desired choice and press [Enter]. An icon appears before the choice to indicate
that it is the currently selected one.
200603163 93-2538 B007-008 manual.qxd 4/19/2006 1:45 PM Page 11