Tripp Lite B007-008 Switch User Manual


 
9
OSD Overview
On Screen Display (OSD), provides a menu driven interface to handle the PC switching procedure.
While Hot Key switching still works, using OSD is a great deal more convenient - especially in large,
daisy chained installations.
All operations start from the OSD Main Menu. To pop up the Main Menu, tap either of the Ctrl keys
twice:
Note: You can change the hotkey to the Scroll Lock key (see F6 below), in which case you would press [Scroll Lock]
[Scroll Lock].
OSD always starts in List view, with the highlight bar at the same position it was in the last time it
was closed.
From the Main Menu, you can go directly to any port by keying in [Ctrl]+[Alt]+[Shift], then the
Port ID Number and pressing [Enter].
Note: With this method, although access switches to the port you just specified, the highlight bar on the OSD
screen doesn’t move
OSD Navigation
[Esc] cancels the current selection, or dismisses the current menu and moves back to the menu one
level above. If you are at the highest menu level, it deactivates OSD.
Use the Up and Down Arrow Keys to move up or down through the list one line at a time
Use [Pg Up] and [Pg Dn] to move up or down through the list one screen at a time
Click on to move up or down through the list one line at a time
Click on to move up or down through the list one screen at a time
To activate a port, move the Highlight Bar to it then press [Enter].
After executing any action, you automatically go back to the menu one level above.
200603163 93-2538 B007-008 manual.qxd 4/19/2006 1:45 PM Page 9