Tripp Lite Power Inverters Power Supply User Manual


 
16
CORDED MODELS: APS1012UL
Series Number: AGAP100012MV2
Weight: 26.8 lbs.
Regulatory Approval: UL458
INVERTER
Continuous power (@ 20° C): 1000 W
Surge power (5 seconds): 2000 W
Efficiency (Full Load): 88%
Minimum/Maximum DC Fuse Rating: 150A/300A
DC Input Current @ Nominal V DC
Full Load 95 A
No Load 2.2 A*
Nominal Input Volts: 12 VDC
DC Input Voltage Range: 10-15 VDC
Nominal Output Volts: 120 VAC ±5%
Nominal Output Frequency: 60 Hz ±.3%
BATTERY CHARGER
Charging Capacity DC: 10 A**
Acceptance Volts VDC: Selectable 14.4 V**/14.2 V Wet**/Gel
Float Volts VDC (w/gel): 13.3 V (13.6 V)
Input Voltage AC: 120 V
Input Current AC: 1.4 A**
LINE VAC OPERATION
Minimum Input AC Volts: Selectable 75**,85, 95, or 105 VAC
Maximum Input AC Volts
(Continuous, Charger at Maximum): Selectable 135** or 145 VAC
Maximum Input Current
(Continuous, Charger at Maximum): 12 A
Input Frequency: 60 Hz ±10%
Maximum Output AC (Continuous): 8.3 A
Automatic Transfer Time: 4-6 ms
* Load sense can reduce this to 1/30 of the listed current. **Factory default setting.
Specifications
(Corded Models)
Note on Labeling
Two symbols are used on the APS labels.
: AC Voltage
: DC Voltage
V~
V
200201192 UL-Listed APS Manual.qxd 5/17/02 12:41 PM Page 16