Filter
Top Products
User’s Guide
Document #40181-120 Rev. A A-3
Information for European Users
The print server and its built-in 802.11a, 802.11b, and 802.11g wireless technology is in compliance with
the Class B Information Technology Equipment requirements and other relevant provisions of European
Directive 1999/5/EC. The limits for Class B equipment were derived for typical residential environments
to provide reasonable protection against interference with licensed communications devices. The internal
function is a radio device using the 2.4 GHz frequency band (2.400GHz – 2.4835GHz). It is intended for
wireless communication with other 802.11a, 802.11b, and 802.11g-enabled devices in an indoor
environment.
The use of 802.11a, 802.11b, and 802.11g wireless technology in certain countries may be restricted.
Before using 802.11x products, please confirm with the frequency management authority in the country
where you plan to use it. Many countries allow indoor use only. In Italy, general authorization is
required if used outside. In France, the use of certain channels is restricted outdoors. In some situations
or environments, the use of 802.11x wireless technology might be restricted by the proprietor of the
building or responsible representatives of the organization, for example, in airplanes, in hospitals or in
any other environment where the risk of interference with other devices or services is perceived or
identified as harmful.
If you are uncertain of the policy that applies to the use in a specific organization or environment, you are
encouraged to ask for authorization to use 802.11x wireless technology prior to switching it on. Consult
your physician or the manufacturer of personal medical devices (pacemakers, hearing aids, etc.) regarding
any restrictions on the use of 802.11x wireless technology.
TROY Group cannot be responsible for any failure to satisfy the protection requirements resulting from a
non-recommended modification of the product.
Declaration of Conformity (CE)
Manufacturer: TROY Group, Inc
2331 South Pullman Street
Santa Ana, California 92705 USA
Telephone: (949) 250-3280
Product: Ethernet and Wireless 802.11a, 802.11b, and 802.11g-enabled print server
Model No.: TROY200 Series
TROY Group, Inc. hereby declares that the above-referenced product, to which this declaration relates, in
is conformity with the provisions of:
Council Directives 1999/5/EC (March 9, 1999), Radio Equipment and Telecommunications Terminal
Equipment.
Standards used and met in the assessment:
ETSI EN 300-328-2 V1.4.1 (2003-04)
ETSI EN 301-489-1 V1.4.1 (2002-08)
ETSI EN 301-489-17 V1.2.1 (2002-08)
ETSI EN 301-893 V1.2.3 (2003-08)
EN 55024
The documents required by this Directive are maintained at the corporate headquarters of TROY Group,
Inc., 2331 South Pullman Street, Santa Ana, California, 92705, USA.