Filter
Top Products
25
4.1.1.4 Print Mode: (Tear Off Mode/Batch Mode/Peeler Mode)
This option is used to set the print mode. Printer default setting is Batch Mode.
When enter this list, the print mode in the right side of icon is the printer
current setting. Press button under and icon to select the different
print mode, and press button under “V” icon to enable the setting.
Printer Mode
Description
Tear Off Mode:
Next label leading edge is aligned to the print head burn
line location.
Batch Mode:
Once image is printed completely, label gap/black mark will
be fed to the tear plate location for tear away.
Peeler Mode:
Enable the label peel off mode.
4.1.1.5 Offset:
This option is used to fine tune media stop location. Press the button
under icon to move the cursor from left digit to right digit, and press the
button to set the value from “+” to “-” or “0” to “9”. Press the button under
“V” icon to set the value into printer. The default value is +000.
4.1.1.6 Reference X & Reference Y:
This option is used to set the origin of printer coordinate system horizontally
and vertically. Press the button under icon to move the cursor from left
digit to right digit, and press the button under icon to set the value from
“0” to “9”. Press the button under “V” to set the value into printer. The
default value is 000.
Batch Mode
Peeler Mode
V
Offset
+000
V
Reference X
000
V
Reference Y
000
V