Filter
Top Products
38
4.1.4.2.7 Escape Char
Use this option to set or view the Command Escape Character (CEC).
Run-time messages from the radio begin with the CEC and the default is
the pound sign (#), which has a decimal value of 035. You may need to
change the default CEC character if it conflicts with other data, because
unexpected operation could occur. The range is a decimal value between
1 and 255.
Press the button under icon to move the cursor from left to right,
and press the button to set the value. Press the button under
“V” icon to save the setting and return the Configure menu.
4.1.4.2.8 Exit
When you select “Exit” after configuring, you see
To save all the configuration settings, press the button under “V” icon.
To exit without saving the configuration settings, press the button
under “X” icon.
4.1.4.3 Reset:
After saving the configuration, please reset the 802.11b WiFi module before
the changes take effect. This option is used to reset the wireless print server
by cycling the power off and than back on.
You may lose your current connection and application. Resetting the network
may take up to one minute before you can access the wireless print server
(radio).
Press any button to return the RF Network menu. The RF Network printer
is ready to use.
Escape Char
+035
V
Save Settings?
Are you sure?
X V
RESET
Reset Command Sent
Hit key to continue