Filter
Top Products
55
7. Maintenance
This session presents the clean tools and methods to maintain your printer.
1. Please use one of following material to clean the printer.
Cotton swab
Lint-free cloth
Vacuum
100% ethanol
2. The cleaning process is described as following
Printer Part
Method
Interval
Print Head
1. Always turn off the printer before cleaning the
print head.
2. Allow the printhead to cool for a minimum of one
minute.
3. Use a cotton swab and 100% ethanol to clean
the print head surface.
Clean the print
head when
changing a
new label roll
Platen Roller
1. Turn the power off.
2. Rotate the platen roller and wipe it thoroughly
with 100% ethanol and a cotton swab, or
lint-free cloth.
Clean the
platen roller
when changing
a new label roll
Peel Roller
1. Turn the power off.
2. Rotate the Peel-off roller and wipe it thoroughly
with 100% ethanol and a cotton swab, or
lint-free cloth.
Clean the peel
roller when
changing a
new label roll
Tear
Bar/Peel Bar
Use the lint-free cloth with 100% ethanol to wipe it.
As needed
Sensor
Compressed air or vacuum
Monthly
Exterior
Wipe it with water-dampened cloth
As needed
Interior
Brush or vacuum
As needed